NextTime NT19 Gasket Kit(3 Mode Edition)
Pls pay attention: To avoid damaging PCB hot swapping sockets, pls make sure your switches' pin is vertical , and you'd better not using used key switches with soldering tin. All Option doesn’t include Keycaps, and if you order Barebone option, you will get NT19 Kit without Switch and Keycap.
Any Option doesn’t include Keycap. Barebone Option doesn’t include Keycap and Switch.
This kit is a Gasket Mounted Type.
2.4G Mode Connection Tutorial
When you first connect with 2.4G Mode, pls switch battery button(at bottom of case) on first, then press FN+4 for 3 sec to make sure the 4 key green LED is twinkling, then plug 2.4G Adapter in, NT19 will matches the adapter automatically .
Pls dont plug 2.4G Adapter in before you press FN+4, otherwise NT19 cant find it.
Bluetooth Connection Tutorial
1Make sure your keyboard is not connected with cable
2Turn battery button on(at the bottom of keyboard)
3Press Fn+1 or 2 or 3 for 3 sec , make sure NT19 is in pairing mode
4Then search Bluetooth device at your mobile device and connect with NT19, next time , you just need press Fn+1 or 2 or 3 to change with different devices.
NT19 Barebone Edition=NT19 Kit Only(without Keycap and switch)
NT19 Gateron Switch Edition=Barebone Edition+Gateron Switch x20
NextTime NT19 Software :pls click this link: //kpchn.com/s/PoHJ
Reviews
There are no reviews yet.